3M™ 08008 Super Weatherstrip and Gasket Adhesive, 5 oz Tube, Paste, Black, 24 hr Curing

About this product

3M™ black super weather stripping adhesive is designed specifically to bond rubber gaskets and weather stripping to metal surfaces. This flexible, high strength adhesive helps ensure a tight waterproof seal on car doors, trunks, sun roofs and more. It cures fast and works right out of the tube, holding rubber weather stripping in place and resisting heat, vibration, oils and detergents. Our 3M™ black super weather stripping adhesive is designed specifically to bond seals and gaskets to metal, ideal for helping ensure a waterproof, airtight seal inside your vehicle. Preferred by auto professionals for decades, this adhesive was developed by 3M™ to bond with weather stripping around doors, trunks, T-tops and sun roofs as well as around your windows. It bonds permanently to a large variety of surfaces including rubber, fabrics, gaskets, seals and metal. The weather stripping adhesive is very easy-to-use . Simply squeeze it right from the tube, easily brush and spread as needed on each surface and let it cure for up to 24 hr. The adhesive remains flexible, yet it resists nearly any condition you're likely to encounter in your vehicle wind, rain, vibration, temperature changes, detergents, grease and more. • Bonds to a range of surfaces including vinyl, metal, fabrics and rubber • Forms flexible, waterproof bond that resists vibration • Easy to brush and spread right from the tube, saving time • Resists oils, solvents, detergents and temperature changes for permanent repairs • Fast drying, strong, flexible, rubbery adhesive adheres to many substrates resists oils, fuels, detergents and grease

Specs

Applicable materials

Fabrics, Metal, Paper, Rubber, Vinyl

Application

For holding paper, cork or rubber gaskets in place during installation

Application time

1 to 5 min

Base type

Neoprene Rubber

Color

Black

Composition

10 to 30% Butanone, 10 to 30% Polychloroprene, 10 to 30% Phenolic Polymer, 4 to 15% n-Hexane, 5 to 10% Toluene, 1 to 7% Heptane, 3 to 7% Magnesium Oxide, 1 to 7% Methylcyclopentane, 1 to 5% 2-Methylpentane, 1 to 5% 3-Methylpentane, 1 to 5% Xylene

Container size (oz)

5

Container type

Tube

Curing time

24 hr

Flash point

-6 deg F

Form

Paste

Odor/scent

Solvent

Setting time

<4 min

Specific gravity

0.9

Standard/approvals

California Pro65 Warning: Cancer and Reproductive Harm | OSHA 29 CFR 1910.1200

Temperature rating (deg F)

-20 to 300

UPC

051135080085

Documents

• Safety Data Sheet (SDS)3m_08008_sds.pdf
• 3m_08001_catalog