Fusor® 208B Slow Panel Bonding Adhesive, 10.1 oz, Paste, Gray, 90 min at 70 deg F Application

About this product

LORD Fusor® 208B adhesive is a two-component, epoxy-based panel bonding adhesive offering extremely low odor during application and tack-free when cured. Fusor 208B adhesive can be used for panel bonding, weld bonding, and rivet bonding of large steel, aluminum and SMC/FRP body panels, such as quarter panels, rear body panels, floor pans and roof skins. • Emits low odor during application; cures to a tack-free surface, allowing panels to be painted and sanded with no need to remove adhesive squeeze out • Bonds a variety of metal and plastic, including steel, aluminum and FRP, weld through with minimal burn back • Provides excellent corrosion protection to weathering • Easy to finish • Paint and sand with no need to remove adhesive squeeze out • Bonds metal and plastic

Specs

Applicable materials

Steel, Aluminum, SMC/Fiberglass

Application

For weld bonding, rivet bonding and bonding of replacement non-structural auto body panels

Application time

90 min at 70 deg F

Color

Gray

Composition

5 to 10% Polyoxypropylenediamine, 5 to 10% Phenol, 1 to 5% Amine Compound

Container size (oz)

10.1

Container type

Cartridge

Curing time

24 hr at 70 deg F

Flash point

?201 deg F, 93 deg C Setaflash Closed Cup

Form

Paste

Odor/scent

Amine

Setting time

4 hr at 70 deg F

Type

Slow

UPC

66623390983

Documents

• fusor_208b_specification_sheet
• Safety Data Sheet (SDS)fusor_208b_sds.pdf
• fusor_301_catalog