Fusor® 2098 Crash Durable/Slow Structural Adhesive, 6.59 oz, Paste, Blue, 90 min at 70 deg F Application

About this product

LORD Fusor® 2098 adhesive is a two-component, epoxy-based, structural metal bonding adhesive providing the strength and durability of OEM quality repairs. It can be used for weld bonding, rivet bonding and bonding of replacement structural and non-structural auto body panels. Fusor 2098 adhesive replaces any structural adhesive currently used by automobile manufacturers, returning vehicles to pre-accident condition. • Provides higher impact strength performance, restores original OEM, NVH and crash durability • Allows heat accelerated cure; weldable immediately after panel is positioned reducing cycle time • Versatile adheres to all prepared steel and aluminum • Provides lifetime corrosion protection • Higher impact strength performance • Adheres to all steel and aluminum • Weld immediately

Specs

Applicable materials

Steel, Aluminum, Metton, SMC/Fiberglass

Application

For weld bonding, rivet bonding and bonding of replacement structural and non-structural auto body panels

Application time

90 min at 70 deg F

Color

Blue

Composition

45 to 50% Epoxy Resin, 5 to 10% Hexanediol Diglycidyl Ether, 5 to 10% Hexaoxa Silaheptadecane, 1 to 5% Bisphenol A, 0.1 to 0.9% Crystalline Silica

Container size (oz)

6.59

Container type

Cartridge

Curing time

24 hr at 70 deg F

Flash point

?201 deg F

Form

Paste

Setting time

6 hr at 70 deg F

Standard/approvals

FIAT | GM | PSA Peugeot | Tesla | OEM Approvals

Type

Crash Durable/Slow

UPC

66623390982

Documents

• Safety Data Sheet (SDS)fusor_2098_sds.pdf
• fusor_2098_specification_sheet
• FUSOR_2098_CRASH_DURABLE_STRUCTURAL_ADH__PT._A