Fusor® 123 2-Part Fast Non-Sag Seam Sealer, 10.1 oz Cartridge, White, Paste, 24 hr Curing

About this product

High performance - provides excellent adhesion to bare or primed surfaces Versatile - bonds bare metal, epoxy or urethane two component primed surfaces, weld-through with minimal burn back Excellent appearance - easily duplicates factory appearance, provides flexible seal with no shrinkage, cracking or sagging Environmentally-resistant - provides excellent corrosion protection Easy to finish - can be tooled, wiped clean, sanded and/or painted immediately FUSOR® 123/126 sealer is a two component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams. FUSOR® 123/126 sealer is used in applications which require a non-sag cosmetic seam sealer with reduced cycle time. Sealer can be applied directly to bare metal or primed surfaces. • High performance provides excellent adhesion to bare or primed surfaces • Versatile bonds bare metal, epoxy or urethane two component primed surfaces, weld through with minimal burn back • Excellent appearance easily duplicates factory appearance provides extremely flexible seal with no shrinkage, cracking or sagging • Environmentally resistant provides excellent corrosion protection • Easy to finish can be tooled, wiped clean, sanded and/or painted immediately

Specs

Applicable materials

2K Primer, Urethane 2K Chemistry

Application

For truck beds, tooled door skin, floor pan

Application time

3 min at 70 deg F

Color

White

Component

2K

Composition

95 to 100% Aliphatic Polyisocyanate, 0.1 to 0.9% Monomeric Aliphatic Diisocyanate (Part A), 5 to 10% Titanium Dioxide (Part B)

Container size (oz)

10.1

Container type

Cartridge

Curing time

24 hr at 70 deg F

Flash point

201 deg F

Form

Paste

Odor/scent

Mild

Paintable (Y/N)

Y

Sprayable (Y/N)

N

Standard/approvals

GHS Hazard

Type

2-Part, Fast

UPC

66623390973