Fusor® 123SL 2-Part Slow Non-Sag Seam Sealer, 10.1 oz Cartridge, White, Paste

About this product

Provides excellent adhesion to bare or primed surfaces Bonds bare metal, epoxy or urethane two component primed surfaces, weld through with minimal burn back Easily duplicates factory appearance, provides extremely flexible seal with no shrinkage, cracking or sagging Can be tooled, wiped clean, sanded and/or painted immediately Allows for use on larger projects where more time is required, can be used in applications where high ambient temperatures cause accelerated cure rates Fusor® 123SL/126SL sealer is a two component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams. Fusor 123SL/126SL sealer is used in applications which require a non-sag cosmetic seam sealer with longer work time or where high ambient temperatures are encountered. Sealer can be applied directly to bare metal or primed surfaces. • High performance provides excellent adhesion to bare or primed surfaces • Versatile bonds bare metal, epoxy or urethane two component primed surfaces, weld through with minimal burn back • Excellent appearance easily duplicates factory appearance provides extremely flexible seal with no shrinkage, cracking or sagging • Environmentally resistant provides excellent corrosion protection • Easy to finish can be tooled, wiped clean, sanded and/or painted immediately • Extended work time allows for use on larger projects where more time is required, can be used in applications where high ambient temperatures cause accelerated cure rates

Specs

Applicable materials

Bare Metal or Primed Surfaces, Urethane 2K Chemistry

Application

For truck beds, tooled door skin, floor pan

Application time

45 min at 70 deg

Color

White

Component

2K

Composition

95 to 100% Aliphatic Polyisocyanate, 0.1 to 0.9% Monomeric Aliphatic Diisocyanate (Part A), 5 to 10% Titanium Dioxide (Part B)

Container size (oz)

10.1

Container type

Cartridge

Curing time

48 hr at 70 deg F, 45 min 140 deg F

Flash point

201 deg F

Form

Paste

Odor/scent

Mild

Paintable (Y/N)

Y

Sprayable (Y/N)

N

Standard/approvals

GHS Hazard

Type

2-Part, Slow

UPC

66623390984

Documents

• fusor_123sl_specification_sheet
• fusor_517_catalog
• FUSOR_101EZ_Catalog
• Safety Data Sheet (SDS)fusor_123md_sds.pdf