Each × 1$48.15
1
Shipped from Mahopac Auto Paint
About this product
Dual-Mix™ Heavy bodied seam sealer is a high viscosity, two-component epoxy for use on interior or exterior seams, joints and voids. • Dual-Mix™ forever warranty • OEM recommended • Direct to metal • Paintable immediately with most solvent-based coatings • Correct color minimizes post-inspection liability • Non-sag formula holds tooling marks • Fast cure increases production • Remains flexible without shrinking or cracking • Sprayable for additional versatility • Ideal for use with new ORBiT™ to duplicate OE ripple bead
Specs
- Applicable materials
- Bare metal, Primed Surfaces
- Application
- For use on bare metal, OEM finish, epoxy primer and DTM urethane primer
- Application time
- 10 min at 70 deg F
- Color
- White
- Composition
- 30 to 40% Bisphenola(chloro)oxirane Polymer, 5 to 7% Fumed Silica, 5 to 7% Epoxy Resin
- Container size (oz)
- 7
- Container type
- Cartridge
- Curing time
- 1 hr at 70 deg F
- Flash point
- 257 deg C
- Form
- Liquid
- Odor/scent
- Characteristic
- Paintable (Y/N)
- Yes
- Product family
- Dual-Mix™ Heavy Bodied Seam Sealer
- Setting time
- 15 min at 70 deg F
- Size
- 7 oz. cartridge
- Sprayable (Y/N)
- Yes
- Standard/approvals
- GHS07 | GHS08 | OSHA HCS Hazard | OEM Approved | California PROP65 Warning: Cancer and Reproductive Harm
- Temperature rating (deg F)
- 70
- Type
- Heavy Bodied 2-Component
- UPC
- 646786404771
Documents
Question regarding this product?
Message paint tech