3M™ 7046 Organic Vapor Cartridge, Use With: 6000 Series, 7800 Series Full Facepiece Respirator

About this product

The 3M™ organic vapor/acid gas cartridge 6003 helps provide respiratory protection against certain organic vapors or acid gases. Use with 3M™ half and full face pieces 6000, 7000 and FF-400 Series with bayonet filter holders. The 3M™ organic vapor/acid gas cartridge 6003 helps provide organic vapor and acid gas protection in a variety of environments. When properly used with an approved 3M™ respirator properly fitted, this respirator cartridge helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide or hydrogen fluoride. The cartridge may be used for vapor concentrations up to ten times the Permissible Exposure Limit (PEL) with half face pieces or fifty times PEL with quantitatively fit tested full face pieces. Recommended applications for the cartridge include assembly and mechanical, batch charging, change overs, chemical dispensing, clean up, cleaning, handling, painting, parts cleaning, pesticide application, powder and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge is not for use in environments that are immediately dangerous to life or health (IDLH). The cartridge has been assigned the color code Yellow in the NIOSH system. Breathing organic vapors or acid gases can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ organic vapor/acid gas cartridge 6003 to help reduce exposure to certain organic vapors and acid gases. • NIOSH approved for protection against certain organic vapors • Swept back design allows an enhanced field of view and comfort • Bayonet compatibility allows use with many 3M™ half and full face piece designs • Wide range of applications reduces inventory needs • Simple installation and usage requirements reduce training needs

Specs

Application

For assembly and mechanical, batch-charging, change-overs, chemical clean-up, chemical dispensing, clean-up, cleaning, composite finishing, final finish, maintenance, paint preparation, painting, parts cleaning, seal coatings, welding

Color

Gray

Material

Plastic

NIOSH approved (Y/N)

Yes

Standard/approvals

NIOSH Approved

Suitable for use with

6000, 7800 and FF-400 Full Facepiece, 6000 Series Half Facepiece Reusable Respirator

UPC

051131070462

Documents

• Safety Data Sheet (SDS)3m_7046_sds.pdf
• 3m_07000_catalog
• 3m_54187_specification_sheet
• 3M_05113107046_Catalog