3M™ Automix™ 08458 Rigid Pillar Foam, 200 mL Cartridge, Liquid, Yellow, 1.24, 1 hr Curing
Please sign in so that we can notify you about a reply
3M™ Rigid Pillar Foam is a two part urethane which foams in place to fill posts, pillars, and automotive body cavities with exceptional ease and consistent quality. This foam is easily to apply with a range of manual and pneumatic 3M™ applicators.
- A high-performance, two-component rigid urethane closed-cell foam offers delayed reaction time
- Foam fills posts, pillars and other automotive body cavities to prevent panel flutter or provide rigidity
- Expanding properties of foam fill hard-to-reach cavities
- Foam replicates appearance and performance of many OEM products
Manufacturer:
3M Products
Application:
For door hem flanges, door skins, floor pans, general purpose, rear body panels, voids and gaps
Color:
Yellow
Composition:
15 to 40% Polypropylene Glycol Glycerol Triether, 1 to 10% Dimethyl Siloxane, Reaction Product With Silica, 1 to 10% Water, 1 to 5% Diethylene Glycol, 1 to 5% Potassium Acetate, 0.5 to 1.5% Polyalkylene Glycol, 0.5 to 1.5% Siloxane Polyalkyleneoxide Copol
Container Size (ml):
200
Container Type:
Cartridge
Curing Time:
1 hr
Flash Point:
>=200 deg F
Form:
Liquid
Brand:
3M™
Product Line:
MMA
Specific Gravity:
1.24
Trade Mark:
Automix™
MFR Model:
08458
Standard/Approvals:
OSHA 29 CFR 1910.1200
No posts found