Fusor® 129 2-Part Fast Controlled Flow Seam Sealer, 7.1 oz Cartridge, Paste, Tan, 1 hr Curing
Please sign in so that we can notify you about a reply
Fusor® 129 controlled flow sealer is a two-component, epoxy-based seam sealer used for duplicating factory appearance on roof channels, door seams, drip rails, trunk seams and truck bed floor seams. Fusor 129 seam sealer is fast curing and bonds extremely well to painted and two-component primed surfaces. Sealer can be applied directly to bare metal on rigid joints, however flexible joints, such as roof seams and drip rails, should always be primed.
- High performance - provides excellent adhesion to bare or primed surfaces
- Versatile, bonds to epoxy or urethane two-component primed surfaces
- Weld through with minimal burn back, tolerates 4 deg F (24 deg C) powder coating cure for 3 min
- Excellent appearance easily duplicates factory appearance provides extremely flexible seal with no shrinkage, cracking or sagging
- Provides extremely flexible seal with no shrinkage, cracking or sagging, applies in smooth continuous beads with no gun lines
- Environmentally-resistant - provides excellent corrosion protection
- Easy to finish, can be tooled, but is not required for factory look, cured sealer may be sanded to a feather edge
Manufacturer:
LORD FUSOR Adhesives
UPC:
8.08498E+11
Application:
For duplicating factory appearance on roof channels, door seams, drip rails, trunk seams and truck bed floor seams
Color:
TAN
Applicable Materials:
2K Primer, Bare Metal, Epoxy 2K Chemistry
Application Time:
5 to 8 min at 70 deg F
Composition:
5% 1,3-Benzenedimethanamine (Part A), 70 to 75% Polymercaptan, 1 to 5% 1,3-Benzenedimethanamine (Part B)
Container Size (oz):
7.1
Container Type:
Cartridge
Curing Time:
1 hr at 70 deg F
Flash Point:
201 deg F
Form:
Paste
Brand:
Fusor®
Odor/Scent:
Solvent
Product Line:
FUS
Type:
2-Part, Fast
Standard/Approvals:
GHS Hazard
No posts found