Equipment

ULTRARACK PANEL STAND
We provide top of the line products to professional users and to the inexperienced D...
$529.00
Availability: 1 item(s)
Quantity:
+
Tweco Classic 4 Air Cooled MIG Gun (400A, 035-045, 15FT, Miller) PART # 1040-1136
We are a family owned and operated RM automotive refinish distributor that has been in...
$623.15
Availability: 1 item(s)
Quantity:
+
WELDCOTE WELDING HELMET AUTO-DARKENING HOOD PART # KLEARVIEWPLUSTC
We are a family owned and operated RM automotive refinish distributor that has been in...
$114.99
Availability: 5 item(s)
Quantity:
+
ADF viewing area: 118 x 71 mm (4.65 x 2.80 in.) and intuitive internal ADF controls including sensitivity and delay Shade range: DIN 3/5-13, adjustable in 0.5 increments & ADF a shade lock setting  ESAB OpTCS Ture color lens tech  ON-board memory for up to 9 settings  Arc sensors: 4  Fast switching time of 0.08 millisecond Replaceable CR2450 battery  Low battery, grind mode & shade lock LEDs 
We are a family owned and operated RM automotive refinish distributor that has been in...
$349.00
Availability: 2 item(s)
Quantity:
+
MatchPen LED Inspection Pen Light Step for pre & post spot inspection Built to last Resistant to solvents. High 95 CRI LED light is perfect for color-matching. Focusable beam for all inspection applications. Runs over 2 hours on 2 AA batteries.
We provide top of the line products to professional users and to the inexperienced D...
$52.00
Availability: 1 item(s)
Quantity:
+
Keep your plastic sheeting off the floor and dust-free with the Innovative Mobile Plastic Sheeting Dispenser. Covered by US patent 10,143,300
We provide top of the line products to professional users and to the inexperienced D...
$262.00
Availability: 1 item(s)
Quantity:
+
Now you can roll your mobile desk right next to the vehicle whether you're in the estimating bay or out back in a gravel parking lot. The large locking drawer lets you securely store your laptop inspection light magnetic arrow system markers etc. The
We provide top of the line products to professional users and to the inexperienced D...
$677.00
Availability: 1 item(s)
Quantity:
+
The DF-1480 bit is our 8 mm or approximately 5/16 in high speed steel cobalt (HSCO) spot-weld bit. The twist is the same size as the shank which is also 8 mm and has a flat spot on it to be tightened into our DF-15DX Series spot weld drills. We also offer
We provide top of the line products to professional users and to the inexperienced DIY...
$25.00
Availability: 12 item(s)
Quantity:
+
Pack of 50 stainless steel DF-800MC/50 M-Clip Breakaway StapleClips. Intended for outside corner application points on thermoplastic parts such as bumpers and clips. The inside corner of a broken part might not be accessible from the backside. Using the M
We provide top of the line products to professional users and to the inexperienced DIY...
$35.00
Availability: 13 item(s)
Quantity:
+
Pack of 50 stainless steel DF-800NC/50 N-Clip Breakaway StapleClips. Intended for high vibration application points on thermoplastic parts such as bumpers and clips. Some straight cracks might be located in high vibration areas like plastic supports under
We provide top of the line products to professional users and to the inexperienced DIY...
$35.00
Availability: 15 item(s)
Quantity:
+
Pack of 50 stainless steel DF-800SC/50 S-Clip Breakaway StapleClips. Intended for hole application points on thermoplastic parts such as bumpers and clips. This staple is a specialty staple that can be used in specific areas like round curves and also in
We provide top of the line products to professional users and to the inexperienced DIY...
$35.00
Availability: 12 item(s)
Quantity:
+
Pack of 50 stainless steel DF-800UC/50 U-Clip Breakaway StapleClips. Intended for rounded corner application points on thermoplastic parts such as bumpers and clips. A curved application staple, it can help with a rounded corner. This is an alternative to
We provide top of the line products to professional users and to the inexperienced DIY...
$35.00
Availability: 12 item(s)
Quantity:
+
Pack of 50 stainless steel DF-800VC/50 V-Clip Breakaway StapleClips. Intended for inside corner application points on thermoplastic parts such as bumpers and clips. A great selection for the inside corners of right angles. The major advantage is to reinfo
We provide top of the line products to professional users and to the inexperienced DIY...
$35.00
Availability: 12 item(s)
Quantity:
+
Pack of 50 stainless steel DF-800WC/50 W-Clip Breakaway StapleClips. Intended for grip corner application points on thermoplastic parts such as bumpers and clips. The specialized W shape really comes handy when a V-Clip will not work. This shape adds extr
We provide top of the line products to professional users and to the inexperienced DIY...
$35.00
Availability: 12 item(s)
Quantity:
+
Pack of 50 stainless steel DF-800ZC/50 Z-Clip Breakaway StapleClips. Intended for stitch tab applications on thermoplastic parts such as bumpers and clips. One of the most common varieties used, the Z Clip is the poster child for versatility. Designed for
We provide top of the line products to professional users and to the inexperienced DIY...
$35.00
Availability: 10 item(s)
Quantity:
+
DETAILS Model 85-25GX-300 Ironworker® Classic Deluxe HHD heavy duty combination welding and cutting kit for use with all fuel gases/acetylene...
We are a family owned and operated RM automotive refinish distributor that has been in...
$314.99
Availability: 6 item(s)
Quantity:
+

Minimum quantity for "Harris Model 85-25GX-300 Deluxe HHD Combination Ironworker® Kit 4400370" is 1.

Brand
Vendor
Price

$  â€“  $

  • ‎$25
  • ‎$851