Dent Fix Equipment DF-1480 Spot Weld Drill Bit, 8 mm Dia, 45 mm Length, Cobalt High Speed Steel
Please sign in so that we can notify you about a reply
The DF-1480 bit is our 8 mm or approximately 5/16 in high speed steel cobalt (HSCO) spot-weld bit. The twist is the same size as the shank which is also 8 mm and has a flat spot on it to be tightened into our DF-15DX Series spot weld drills. We also offer this bit with a titanium heat-resistant coating DF-1680T. Our drill bits a specifically designed for the abuse of spot weld drilling. Flat ground for strength, centering nib to prevent walking. Our German made spot weld bits are available in 3 sizes, 6.5 mm (DF-1465), 8 mm (DF-1480) and 10 mm (DF-1610). These cobalt high speed steel mix bits are 45 mm long.
- The DF-1480 bit is our 8.0 mm or approximately 5/16th of an in high speed steel cobalt (HSCO) spot-weld bit
- The twist is the same size as the shank which is also 8.0mm and has a flat spot on it to be tightened into our DF-15DX series spot weld drills
- Flat ground for strength, centering nib to prevent walking
- This German made bit may be used with off brand spot weld drills
Manufacturer:
Dent Fix Equipment
Brand:
Dent Fix Equipment
Material:
Cobalt High Speed Steel
Product Line:
DEN
Diameter (mm):
8
MFR Model:
DF-1480
Part No.:
DF1480
Shank Type:
One-Flatted
Standard/Approvals:
California Pro65 Warning: Cancer and Reproductive Harm
No posts found